How to Choose the Right Windows and Doors
May 22, 2021
iCrowdMarketing powered by iCrowdNewswire
Homeowners install new windows and doors because of different reasons. For some, their windows are old and falling off, or they are warped. Others want to improve their home’s energy efficiency, while other people want to enhance their home’s curb appeal.
Replacing windows is not a challenging task, and you can do it yourself to save on labor costs. If you have decided that it is time to get new Oakville windows and doors for your house, our steps will help you do a successful installation.
- Uninstall The Window Trim And Jamb Extensions
Remove the window trim and casing from the window. The trim covers the jambs, and jambs are used to align the window with the wall.
- Pull Out The Old Window
Remove the screws on the jamb and remove the window. Be careful with the glass sashes because they can break in the process. If your window sashes have moving tracks, you can remove the sashes first.
- Prepare The Window Opening
You should inspect the frame to ensure it is in good condition. Make sure there are no cracks and rotting. Look if it is infested by insects too. If you notice damaged parts, you can repair or replace them.
Wood putty will block cracks on the frame. Take the right measurements of the existing space to get the right window.
- Replace The Window Stop
Window stops are installed to protect the window from sliding out. If the previous stop is in good condition, you can put it back. However, you will need to replace the window stop if it is damaged.
- Test The Window On The Opening
Get your new window and try to fit it in the opening. This ensures it is of the correct size. If parts of the window are too big for your space, you will need to trim them until you are satisfied with the size.
That is why it is advisable to take measurements and be careful when measuring the space of the existing window.
- Install And Secure The Window
Before installing the window, apply silicone on the inside of the frame and fit the window into the opening. Test if the window is sitting a level by putting a level diagonally. Make holes for the screws.
Most windows come with their screws. Put a screw on each side of the window to anchor it into the frame. You should use a driller to make the holes where the screws will fit.
- Insulate
There might be spaces left between the windows and doors and the frame or between the frame and the wall. These spaces can be entry of cold air, which will reduce your home’s energy efficiency and cause an increase in energy bills. You can use insulation materials to block these spaces. Some homeowners use an expanding spray insulation foam. You can also add caulking to ensure the window is air-tight.
- Install Extension Jambs And Molding
There are many types of molding, and you can pick on one that fits your style and preference. Moldings should match your home’s décor too. Get the correct measurements of each and cut the trims to fit. You can make the trims look better by cutting them at angles of 45 degrees.
The trims also add a frame to your window. You can add wood trims between the frame and the wall to cover any gaps that may be left.
- Paint Your Window
The last step in the windows and doors installation process is painting the newly installed units. Choose a color that coordinates well with the interior decor or the home’s theme. You should also fill all the nail holes with wood putty and ensure the trim is also painted.
If there is dried caulking or insulation foam on the frame, scrape it off before painting the window to leave the window clean.
- Operate Your Window
How do you know your Oakville windows & doors are well installed? Well, open and close your window to ensure it operates well. You can apply lubricating oil to the moving parts to ensure they function well. In case they do not operate as expected, you should check whether the window fits into the frame properly.
Tags: English